802.1X Re-Authenticate - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

802.1x re-authenticate

Forces a particular 802.1X port to be re-authenticated.

802.1x reauthenticate slot/port

Syntax Definitions

By default, 802.1X ports are not configured for periodic re-authentication. Use the 802.1x re-authenti-

cate command to force a re-authentication.

Platforms Supported

OmniSwitch 6400, 6850,6850E, 6855, 9000E

Usage Guidelines

This command forces a port to be re-authenticated, regardless of the re-authentication setting config-

ured for the

Re-authentication is transparent to the user. It does not affect traffic on the port unless there is a prob-

lem with the physical device connected to the port. The re-authentication mechanism verifies that there

is a device connected to the port, and that the authentication exchange is still valid.

-> 802.1x reauthenticate 3/1

Release History

Release 6.1; command was introduced.

Related Commands

dot1xPaePortTable

dot1xPaePortReauthenticate

The slot and port number of the 802.1x port.

Configures 802.1X parameters on a particular slot/port.

OmniSwitch CLI Reference Guide

802.1X Commands