Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3039

Service Assurance Agent Commands
•
If the source MEP-Id/MA/MD does not exist, the configuration will be accepted and no error will be
returned.
•
When target-endpoint is specified then it must be learned before initiating loopback.
•
When target-endpoint is specified and learned, Ethernet Loopback will be transmitted irrespective of
whether the RMEP state is OK or failed.
•
The drop-eligible, data, num-pkts and inter-pkt-delay are optional parameters. If these values are
specified, the entry will be created with these values. If none of them are specified, the SAA will be
created with default values. The num-pkts and inter-pkt-delay can be modified later.
•
The SAA must not be in a 'started' state at the time the num-pkts or inter-pkt-delay parameters are
modified. Make sure the SAA is stopped before attempting to modify these parameters.
•
The Target MEP/MAC, source MEP, domain, association and priority parameters are mandatory. If
they are not specified, the CLI will return an error.
•
The data parameter is optional. If this parameter is not specified, then it is not sent in the loopback
message.
•
The timeout value for each LB packet is one second. This value is not configurable.
Examples
-> saa saa1 type ethoam-loopback target-endpoint 10 source endpoint 1 domain md1
association ma1 vlan-priority 5 drop-eligible false
-> saa saa2 type ethoam-loopback target-endpoint 10 source endpoint 2 domain md1
association ma1 vlan-priority 5 drop-eligible true data « monitor association ma1 »
num-pkts 6 inter-pkt-delay 500
-> saa saa3 type ethoam-loopback target-endpoint 15 source endpoint 1 domain md1
association ma1 vlan-priority 5 drop-eligible false data « monitor association ma1
» num-pkts 6
-> saa saa4 type ethoam-loopback target-endpoint 10 source endpoint 2 domain md1
association ma1 vlan-priority 5 drop-eligible true inter-pkt-delay 500
Release History
Release 6.4.3; command was introduced.
Related Commands
show saa
show saa statistics
MIB Objects
alaSaaEthoamCtrlTable
alaSaaEthoamCtrlTestIndex
alaSaaEthoamCtrlRowStatus
alaSaaEthoamCtrlTestMode
alaSaaEthoamCtrlTgtMAC
alaSaaEthoamCtrlSrcMepId
alaSaaEthoamCtrlDomainName
alaSaaEthoamCtrlAssociationName
alaSaaEthoamCtrlNumPkts
alaSaaEthoamCtrlInterPktDelay
OmniSwitch CLI Reference Guide
Displays SAA configuration information.
Displays SAA statistics.
June 2012 page 47-7