L2 Encapsulation Profile - Alcatel-Lucent 1850 User Provisioning Manual

Transport service switch
Table of Contents

Advertisement

Menu bar
............................................................................................................................................................................................................................................................
– 1 (3.33 ms,10 ms,100 ms,1s,10s,1m,10 m)
PHE Range - Specifies the selector of values range for user-defined PHB Profile. The
allowable values are:
– 1 (MPLS profile with 5 DiffServ Classes)
– 2 (MPLS profile with 8 DiffServ Classes)
PM Granularity - Specifies the selector of T-MPLS PM counters. The default value
of this parameter is 15MIN. The values are:
– 15MIN (In Minutes)
– 60MIN (In Minutes)
The Save hyperlink is used to save all the settings and return to the previous page.

L2 encapsulation profile

L2 Encapsulation Profile displays the following as shown in
Figure 3-10 L2 encapsulation profile
The Layer 2 Encapsulation Profile Management tab displays the following parameters:
Access Identifier - This specifies the access identifier to the L2ENCAP profile stored
in the system. The values are in the range L2ENCAPPROF-{1-32}.
MAC Destination Address - This specifies the Medium Access Control Address to
be used in case of mapping of MPLS over Ethnic when a switched network is present.
Tagged Flag - This specifies the flag Tagged/Untagged.
VLAN-ID - This specifies the VLAN identifier to be used in case of mapping of
MPLS over Ethernet when a switched network is present. The parameter is mandatory
if Tagged Flag=TAGGED, otherwise it is not valid.
Priority - This specifies the priority value for TAGGED Ethernet frame. It is not valid
if Tagged Flag=UNTAGGED.
Drop Eligible - This specifies the drop eligible indication according to 802.1ad. It is
not valid if Tagged Flag=UNTAGGED.
In-Use - This specifies if the L2ENCAP Profile is referenced by a Tunnel Segment or
Pseudowire Segment.
Click Create to configure the L2 Encapsulation Profile. See
profile" (p. 5-66).
............................................................................................................................................................................................................................................................
3 - 22
(T)-MPLS menu
Figure
3-10.
"Create L2 encapsulation
8DG08763KAAA
Issue 1 February 2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tss-320Tss-160

Table of Contents