show aaa hic server-failure policy
Displays the HIC server failure mode and UNP mapping.
show aaa hic server-failure policy
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
N/A
Examples
-> show aaa hic server-failure policy
Mode: Hold
UNP Source
-----------------------------------+-----------------------------------
unp1
output definitions
Mode
UNP Source
UNP Destination
Release History
Release 6.4.4; command was introduced.
page 36-150
UNP Destination
unp2
The HIC Server Failure Mode; Hold or Pass-Through.
The current UNP of the users.
The UNP that the users will be moved to if both HIC servers are
unavailable.
OmniSwitch CLI Reference Guide
AAA Commands
June 2012