Write Memory Flash-Synchro - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

CMM Commands

write memory flash-synchro

Copies the running configuration (RAM) to the working directory, certifies the primary CMM and
synchronizes the primary and secondary CMM.
[configure] write memory flash-synchro
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This command is a combination of the 'write memory' and 'copy working certified flash-synchro'
commands and does the following:
1
Copies the running configuration (RAM) to the working directory.
2
Overwrites the contents of the certified directory on the primary CMM with the contents of the work-
ing directory on the primary CMM.
3
Synchronizes the primary and secondary CMMs.
•
This command is only valid if the switch is running from the working directory. Use the
running-directory
Examples
-> write memory flash-synchro
Release History
Release 6.3.4; command was introduced.
Related Commands
write memory
copy flash-synchro
OmniSwitch CLI Reference Guide
command to check from where the switch is running.
Copies the running configuration (RAM) to the working directory.
Copies the startup primary flash version of the CMM software to the
startup secondary flash version of the CMM software.
June 2012
show
page 53-11