Configure Service Customer Contact - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service customer contact

Configures contact information for the specified customer account. Use this command to provide informa-
tion about the customer, such as a contact name or account contract name.
configure service customer customer-id contact contact-info
configure service customer customer-id no contact
Syntax Definitions
customer-id
contact-info
Defaults
By default, no customer contact information is configured when a customer account ID is created.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the no form of this command to remove customer contact information from the specified customer
account ID.
•
Printable, 7-bit ASCII characters are allowed in the contact information string.
Examples
-> configure service customer 10 contact "Thomas Smith - Tech Support"
-> configure service no contact
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing customer ID number.
An ASCII text string up to 80 characters in length. Enclose special char-
acters, such as #, $, or spaces, in double quotation marks (for example
"Technical Support").
June 2012 page 50-5