Show Netsec Operation - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show netsec operation

Displays the network security operational conditions.
show netsec [group {grp_name | all} | port slot/port[-port2]] [anomaly {anomaly_name | all}] operation
Syntax Definitions
grp_name
group all
slot/port1
-port2
anomaly_name
anomaly all
Defaults
By default, the network security operational condition of all the anomalies is displayed.
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
To display the network security operational condition for a particular monitoring-group, specify only the
group parameter.
Examples
-> show netsec operation
Port-Range
Group
-------------+------------------+----+---+---+----+-------+----------+----------
h arp-addr-scan
h arp-flood
h arp-failure
h icmp-addr-scan
h icmp-flood
h icmp-unreachable
h tcp-port-scan
h tcp-addr-scan
h syn-flood
h syn-failure
h syn-ack-scan
h fin-scan
h fin-ack-diff
h rst-count
page 38-18
The name of the port-group (up to 16 characters).
Specifies all the monitoring-groups.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
The type of the anomaly.
Monitors all anomalies.
Anomaly S
E
E
E
E
E
E
E
E
E
E
E
E
E
E
L T Q Per
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
E D D 30
OmniSwitch CLI Reference Guide
Network Security Commands
Cnt Sen
30 50
90 50
6 50
30 50
90 50
20 50
20 50
30 50
90 50
10 50
2 50
6 50
5 50
50 50
June 2012