Show Policy Condition - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show policy condition

Displays information about pending and applied policy conditions.
show [applied] policy condition [condition_name]
Syntax Definitions
applied
condition_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy conditions displays unless condition_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy condition.
- Indicates the policy condition is pending deletion.
# Indicates that the policy condition differs between
the pending/applied conditions.
Examples
-> show policy condition
Condition Name:
pcond1
*IP :
+c4
*IP : 10.11.2.0/255/255/255.0
*TCP :
-> show policy condition c*
Condition Name:
+c4
*IP : 10.11.2.0/255/255/255.0
*TCP :
page 33-220
Indicates that only conditions that have been applied should be
displayed.
The name of the condition for which you want to display information; or
a wildcard sequence of characters for displaying information about
conditions with similar names. Use an asterisk (*) to indicate a wildcard
character.
From Src ->
cli
Any ->
cli
->
Any ->
From Src ->
cli
->
Any ->
QoS Policy Commands
Dest
198.60.82.0/255.255.255.0
Any
600
Dest
Any
600
OmniSwitch CLI Reference Guide June 2012