Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3084

•
This command does not support OAM ping for static LSPs.
Examples
-> oam lsp-ping prefix 5.5.5.5/32 send-count 5
LSP-PING 5.5.5.5/32: 80 bytes MPLS payload Seq=1, send from intf ip500, reply from
70.0.0.5
udp-data-len=32 ttl=255 rtt=16ms rc=3 (EgressRtr) Seq=2, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr) Seq=3, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr) Seq=4, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr) Seq=5, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr)
---- LSP 5.5.5.5/32 PING Statistics ----
5 packets sent, 5 packets received, 0.00% packet loss round-trip min < 10ms, avg <
10ms, max = 16.0ms, stddev = 6.50ms
-> oam lsp-ping prefix 5.5.5.5/32 send-count 5 size 9000 interval 2
LSP-PING 5.5.5.5/32: 9000 bytes MPLS payload Seq=1, send from intf ip500, reply
from 70.0.0.5
udp-data-len=32 ttl=255 rtt=866ms rc=3 (EgressRtr) Seq=2, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr) Seq=3, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt=966ms rc=3 (EgressRtr) Seq=4, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt<10ms rc=3 (EgressRtr) Seq=5, send from intf
ip500, reply from 70.0.0.5
udp-data-len=32 ttl=255 rtt=966ms rc=3 (EgressRtr)
---- LSP 5.5.5.5/32 PING Statistics ----
5 packets sent, 5 packets received, 0.00% packet loss round-trip min < 10ms, avg =
559ms, max = 966ms, stddev = 459ms
output definitions
LSP-PING prefix or name
MPLS payload
Seq
Send from intf
reply from
udp-data-len
ttl
rtt
rc
packets sent
packets received
page 48-28
IP Prefix of the destination node for the LDP-signaled LSP.
Size of the ping message in octets.
Sequence number of response.
Name of the interface on which the probe was sent.
The IPv4 address of the node that generated this reply.
UDP data length of the echo reply.
TTL specified in ping.
Number of milliseconds from when a probe was sent to when its
response was received.
Number and type of return code in response.
Number of probes sent for this entry.
Number of probes received for this entry.
MPLS LDP Commands
OmniSwitch CLI Reference Guide June 2012