Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2432

Slot08
pgroup1
pgroup2
output definitions
Group Name
From
Entries
Release History
Release 6.1; command was introduced.
Related Commands
policy port group
MIB Objects
alaQoSPortGroupsTable
alaQoSPortGroupsName
alaQoSPortGroupsSource
alaQoSAppliedPortGroupsTable
alaQoSAppliedPortGroupsName
alaQoSAppliedPortGroupsSource
alaPortGroupTable
alaQoSPortGroupSlot
alaQoSPortGroupPort
alaAppliedPortGroupTable
alaQoSAppliedPortGroupSlot
alaQoSAppliedPortGroupPort
page 33-212
blt
cli 2/1
3/1
3/2
cli 2/2
2/3
The name of the port group, configured through the policy port group
command or built-in port groups automatically set up by the switch
(Slot01, Slot02, Slot03, etc.).
The origin of the port group: cli indicates that the entry was configured
on the switch; ldap indicates the entry was configured through Policy-
View; blt indicates the entry was set up automatically by the switch
based on the current hardware.
The slot/port combinations associated with the port group.
Configures a port group and its associated slot and port numbers.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012