End-User Profile Port-List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

end-user profile port-list

Configures a range of ports associated with an end-user profile.
end-user profile name port-list slot1[/port_range1] [slot2[/port_range2] ...]
end-user profile name no port-list slot1 [slot2...]
Syntax Definitions
name
slot1
port_range1
slot2
port_range2
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the no form of the command to remove a port list or lists from an end-user profile. Note that the no
form removes all the ports on a given slot or slots.
Examples
-> end user profile Prof1 port-list 2/1-3 3 4/1-5
-> end user profile Prof1 no port-list 4
Release History
Release 6.1; command was introduced.
page 36-76
The name of an existing or a new end-user profile.
The slot number associated with the profile.
The port or port range associated with slot1. Ports are separated by a
hyphen, for example 2-4.
Additional slots may be associated with the profile.
Additional ports may be associated with additional slot numbers associ-
ated with the profile.
OmniSwitch CLI Reference Guide
AAA Commands
June 2012