Show Service L2Profile - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show service l2profile

Displays the Layer 2 profile configuration information for the router. This type of profile is applied to
access (customer-facing) ports and specifies how to process Layer 2 protocol frames ingressing on such
ports.
show service l2profile [profile-name]
Syntax Definitions
profile-name
Defaults
By default, all profiles are displayed if a profile name is not specified with this command.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the profile-name parameter to display information for a specific profile. Entering a profile name is
case sensitive.
•
If there are no profiles configured for the router, this command still displays the information for the
default profile (def-access-profile). This profile is applied to access ports that were not associated with
a specific profile.
Examples
->show service l2profile
Port Profile Table
Profile Name
-----------------------------+-------+-------+-------+-------+-------+------+------
DropBPDU
Tunnel-Amap
def-access-profile
Number of Port Profiles: 3
->show service l2profile Tunnel-Amap
Port Profile Table
Profile Name
-----------------------------+-------+-------+-------+-------+-------+------+------
Tunnel-Amap
Number of Port Profiles: 1
page 50-74
An existing Layer 2 profile name. Use quotes around string if the profile
name contains multiple words with spaces between them (e.g., "Alcatel-
Lucent Engineering").
Stp 802.1x
drop drop peer
tunnel drop peer
tunnel drop peer
Stp 802.1x
tunnel drop peer
Virtual Private LAN Service (VPLS) Commands
802.3ad 802.1ab GVRP
drop tunnel
drop tunnel
drop tunnel
802.3ad 802.1ab GVRP
drop tunnel
OmniSwitch CLI Reference Guide
AMAP MVRP
drop tunnel
tunnel tunnel
drop tunnel
AMAP MVRP
tunnel tunnel
June 2012