System Time-And-Date Synchro - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

system time-and-date synchro

Synchronizes the time and date settings between primary and secondary CMMs.
system time-and-date synchro
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
•
The system time-and-date synchro command applies only to switches with redundant CMM
configurations.
•
Synchronizing date and time settings is an important step in providing effective CMM failover for
switches in redundant configurations. Be sure to periodically synchronize the primary and secondary
CMMs using this command.
•
For detailed redundancy information on OmniSwitch chassis-based switches refer to the "Chassis
Management Module (CMM)" chapter in the Hardware Users Guide and "Managing CMM Directory
Content" in the OmniSwitch AOS Release 6 Switch Management Guide. For stackable switches, refer to
"Managing Stacks" in addition to "Managing CMM Directory Content".
Examples
-> system time-and-date synchro
Release History
Release 6.1; command was introduced.
Related Commands
copy flash-synchro
MIB Objects
systemServices
page 54-8
Copies the certified directory version of the primary CMM software to
the certified directory of the secondary CMM.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide June 2012