Show Swlog - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show swlog

Displays switch logging information (e.g., switch logging status, log devices, application IDs with non-
default severity level settings).
show swlog
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This command can also be used on the secondary CMM.
Examples
-> show swlog
Operational Status
Log Device 1
Log Device 2
Log Device 3
Syslog FacilityID
Remote command-log
Console Display Level
All Applications Trace Level
output definitions
Operational Status
Log Device
Syslog FacilityID
Remote command-log
Console Display Level
All Applications Trace Level
page 51-16
: On,
: flash,
: console,
: ipaddr 1.1.1.1 remote command-log,
: local0(16),
: Disabled,
: debug3 (9),
: info (6)
The operational status of switch logging.
The device where the output is being logged.
The facility ID that switch logging will include in the priority (PRI)
section of the event message.
The status of the remote command-log feature.
The Consol Display Level. Levels include alarm (2), error (3), alert (4),
warning (5), info (6), debug1 (7), debug2 (8), and debug3 (9).
The Severity Level of the Application ID. Levels include alarm (2),
error (3), alert (4), warning (5), info (6), debug1 (7), debug2 (8), and
debug3 (9).
Switch Logging Commands
OmniSwitch CLI Reference Guide June 2012