output definitions (continued)
L
T
Q
Per
Cnt
Sen
Release History
Release 6.3.1; command was introduced.
Related Commands
netsec group anomaly
show netsec config
MIB Objects
alaNetSecPortOp
alaNetSecPortOpIfId
alaNetSecPortOpAnomaly
alaNetSecPortOpState
alaNetSecPortOpLog
alaNetSecPortOpTrap
alaNetSecPortOpQuarantine
alaNetSecPortOpCount
alaNetSecPortOpSensitivity
alaNetSecPortOpPeriod
page 38-20
Log (- indicates Not configured, E indicates enabled, and D indicates
disabled).
Trap (- indicates Not configured, E indicates enabled, and D indicates
disabled).
Quarantine (- indicates Not configured, E indicates enabled, and D
indicates disabled).
Anomaly monitoring period (- indicates Not configured)
Anomaly detection threshold (- indicates Not configured)
Anomaly sensitivity (- indicates Not configured)
Configures the monitoring period of an anomaly for a port-group,
packet count configuration for triggering anomaly detection, anomaly
detection algorithm's sensitivity to discrepancy in standard and
observed traffic pattern.
Displays the current network security configurations.
Network Security Commands
OmniSwitch CLI Reference Guide
June 2012