Ethernet OAM Commands
ethoam association mhf
Configures the MIP Half Function (MHF) value for MA Entry.
ethoam association ma_name domain md_name mhf {none | default | explicit | defer}
Syntax Definitions
ma_name
md_name
none
default
explicit
defer
Defaults
parameter
none | explicit | default | defer
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
MA must be created before it is modified.
•
On modification of 'mhf' for any MA, Automip shall also be invoked for all VLANS associated with
this primary VID.
Examples
-> ethoam association MA domain MD mhf-creation defer
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; mac_address parameter added.
Release 6.4.3; command was introduced.
OmniSwitch CLI Reference Guide
Association name for the created Ethernet OAM Association.
Specifies the domain name used while creating the management domain
for which this management association is created.
No MHFs can be created.
MHFs can be created.
MHFs can be created only if a MEP is created at some lower MD Level.
The creation of MHFs is determined by the corresponding MD object
'dot1agCfmMdMhfCreation'.
default
defer
June 2012
page 45-11