Configure Service Vpls Description - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service vpls description

Configures a description for the specified Virtual Private LAN Service (VPLS).
configure service vpls service-id [customer customer-id] description desc-info
configure service vpls service-id [customer customer-id] no description
Syntax Definitions
service-id
customer-id
desc-info
Defaults
By default, a description is not added when the VPLS is created.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the no form of this command to remove the description from the specified VPLS.
•
Specifying the customer ID associated with this VPLS is not required when using this command.
However, if the customer ID specified is not the one associated with the VPLS, the command is not
allowed.
•
Printable, 7-bit ASCII characters are also allowed in the description text string.
Examples
-> configure service vpls 10 description "VPLS1-CustA"
-> configure service vpls 10 customer 10 description "VPLS1-CustA"
-> configure service vpls 10 no description
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing VPLS ID number.
Optional. The customer ID number associated with the specified service
ID number.
An ASCII text string up to 80 characters in length. Enclose special char-
acters, such as #, $, or spaces, in double quotation marks (for example
"PE1 to PE2 Service1").
June 2012 page 50-31