Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2525

802.1X Commands
output definitions (continued)
EAPOL frames transmitted
EAPOL Start frames received The number of EAPOL Start frames that have been received by the
EAPOL Logoff frames
received
EAP Resp/Id frames received
EAP Response frames
received
EAP Req/Id frames transmit-
ted
EAP Req frames transmitted
EAP length error frames
received
Invalid EAPOL frames
received
Release History
Release 6.1; command was introduced.
Related Commands
802.1x captive-portal address
MIB Objects
dot1xAuthStatsTable
dot1xAuthEapolFramesRx
dot1xAuthEapolFramesTx
dot1xAuthEapolStartFramesRx
dot1xAuthEapolLogoffFramesRx
dot1xAuthEapolRespIdFramesRx
dot1xAuthEapolRespFramesRx
dot1xAuthEapolReqIdFramesTx
dot1xAuthEapolReqFramesTx
dot1xAuthInvalidEapolFramesRx
dot1xAuthEapLengthErrorFramesRx
dot1xAuthLastEapolFrameVersion
dot1xAuthLastEapolFrameSource
OmniSwitch CLI Reference Guide
The number of EAPOL frames of any type that have been transmitted
by the switch.
switch.
The number of EAPOL Logoff frames that have been received by the
switch.
The number of EAP Resp/Id frames that have been received by the
switch.
The number of valid EAP Response frames (other than Resp/Id frames)
that have been received by the switch.
The number of EAP Req/Id frames that have been transmitted by the
switch.
The number of valid EAP Request frames (other than Req/Id frames)
that have been transmitted by the switch.
The number of EAPOL frames that have been received by the switch
for which the Packet Body Length field is invalid.
The number of EAPOL frames that have been received by the switch
for which the frame type is not recognized by the switch.
Displays information about ports configured for 802.1X.
June 2012 page 35-51