Show Saa Type Config - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Service Assurance Agent Commands

show saa type config

Displays the SAA configuration for the specified SAA type.
show saa [string] type {ip-ping | ethoam-loopback | ethoam-two-way-delay} config
Syntax Definitions
string
ip-ping
ethoam-loopback
ethoam-two-way-delay
Defaults
By default, all SAAs with the specified type are displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the string parameter to display information for a specific SAA
•
If the SAA ID string specified does not match the specified SAA type, the CLI will return an error.
Examples
-> show saa type ip-ping config
SAA : saa20
SAA-type
Status
Start At
Stop At
Description
Interval(minutes)
Source-IP
Payload-Size (bytes): 24,
Num-pkts
SAA : saa31
SAA-type
Status
Start At
Stop At
Description
Interval(minutes)
Source-IP
Payload-Size (bytes): 24,
Num-pkts
SAA-ID : 81
SAA-type
Status
OmniSwitch CLI Reference Guide
An existing SAA ID string.
Displays IP Ping SAAs.
Displays ETH-LB SAAs.
Displays ETH-DMM SAAs.
: ip-ping,
: started,
: -
: 2010-02-08,12:00:00.0
: datacenter1,
: 130,
: 0.0.0.0,
: 5,
: ip-ping,
: started,
: -
: -
: datacenter8,
: 180,
: 0.0.0.0,
: 5,
: ip-ping,
: stopped,
June 2012
Destination-IP
Type-of-Service
Inter-pkt-delay
Destination-IP
Type-of-Service
Inter-pkt-delay
: 172.21.161.65,
: 0,
: 1000
: 172.21.161.65,
: 0,
: 1000
page 47-17