Swlog Syslog-Facility-Id - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Switch Logging Commands

swlog syslog-facility-id

Specifies a facility ID that switch logging will include in the priority (PRI) section of the event message.
swlog syslog-facility-id {facility_id | integer}
Syntax Definitions
facility_id
integer
Supported Facility IDs and their Numeric Equivalents
kernel - 0
user - 1
mail - 2
system - 3
sec-auth1-4
syslog - 5
lptr - 6
net-news - 7
UUCP - 8
clock1- 9
sec-auth2 - 10
FTP - 11
Defaults
parameter
facility_id
integer
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
Use the ID name (i.e., system) or the numeric equivalent to specify the facility ID.
Examples
-> swlog syslog-facility-id system
-> swlog syslog-facility-id 3
Release History
Release 6.3.1.R02; command was introduced.
OmniSwitch CLI Reference Guide
A facility identification keyword. Current facility IDs are listed in the
table below.
A numerical equivalent value for the facility ID, in the range of 0–23.
Current numeric equivalent values are listed in the table below.
NTP - 12
log-audit - 13
log-alert - 14
clock2 - 15
local0 - 16
local1 - 17
local2 - 18
local3 - 19
local4 - 20
local5 - 21
local6 - 22
local7 - 23
default
local0
16
June 2012 page 51-3