Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3399

Chassis Management and Monitoring Commands
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Firmware Version:
Admin Status:
Operational Status:
Power Consumption:
Power Control Checksum:
MAC Address:
ASIC - Physical 1 (hex):
ASIC - Physical 2 (hex):
ASIC - Physical 3 (hex):
CPLD - Physical 1 (hex):
output definitions
Model Name
Description
Part Number
Hardware Revision
Serial Number
Manufacture Date
Firmware Version
Admin Status
Operational Status
Power Control Checksum
MAC Address
ASIC - Physical
CPLD - Physical
Release History
Release 6.1; command was introduced.
Related Commands
show module
show module status
OmniSwitch CLI Reference Guide
902271-10,
002,
E23L9059,
JUN 08 2004,
N/A,
POWER ON,
UP,
200,
0x0,
00:d0:95:a3:e5:0b,
BCM5695_A1,
BCM5695_A1,
BCM5670_A1
0006/00
The NI's module name. For example, OS9-GNI-C24 indicates a twenty
four-port 10/100/1000BaseT Ethernet module.
A general description of the NI. For example, 24pt 10/100/1000BaseT
Mod indicates a twenty four-port 10/100/1000BaseT Ethernet module.
The Alcatel-Lucent part number for the NI.
The hardware revision level for the NI.
The Alcatel-Lucent serial number for the NI's printed circuit board
(PCB).
The date the NI was manufactured.
The firmware version for NI's ASICs.
The current power status of the NI. Options include POWER ON or
POWER OFF.
The operational status of the NI. Options include UP or DOWN. The
operational status can be DOWN while the power status is on, indicat-
ing a possible software issue.
The current power control checksum for the corresponding NI.
The MAC address assigned to the NI.
General information regarding the NI's ASICs.
General information regarding the CPLD.
Displays the basic information for either a specified module or all mod-
ules installed in the chassis.
Displays the basic status information for either a specified module or all
modules installed in the chassis.
June 2012 page 54-45