Show Policy Port Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy port group

Displays information about pending and applied policy port groups.
show [applied] policy port group [group_name]
Syntax Definitions
applied
group_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy port groups displays unless group_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy port group.
- Indicates the policy port group is pending deletion.
# Indicates that the policy port group differs between
the pending/applied port groups.
Examples
-> show policy port group
Group Name:
Slot01
Slot02
Slot03
Slot04
Slot05
Slot06
Slot07
OmniSwitch CLI Reference Guide
Indicates that only policy port groups that have been applied should be
displayed.
The name of the policy port group for which you want to display infor-
mation; or a wildcard sequence of characters for displaying information
about port groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
From Entries
blt
blt
blt
blt
blt
blt
blt
June 2012 page 33-211