Swlog Clear - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

swlog clear

Clears the files that store switch logging data.
swlog clear
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use this command when the switch logging display is too long due to some of the data being old or out
of date.
•
This command can also be used on the secondary CMM.
Examples
-> swlog clear
Release History
Release 6.1; command was introduced.
Related Commands
swlog remote command-log
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingClear
page 51-12
Enables or disables switch logging output to the console, file, or data
socket.
Displays stored switch logging information from flash.
Displays switch logging information.
Switch Logging Commands
OmniSwitch CLI Reference Guide June 2012