Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3216

Examples
-> configure service vpls 10 mesh-sdp 100 create
-> configure service vpls 20 mesh-sdp 200 vc-type vlan create
-> configure service no mesh-sdp 100
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls mesh-
sdp shutdown
configure service vpls mesh-
sdp egress vc-label
configure service vpls mesh-
sdp ingress vc-label
configure service vpls mesh-
sdp static-mac
show service sdp-using
show service id sdp
MIB Objects
sdpBindTable
sdpBindId
sdpBindType
svcBaseInfoTable
svcId
svcDefMeshVcId
page 50-42
Enables or disables the administrative status of the specified SDP mesh
binding.
Configures the static MPLS VC label used by this router to send packets
to the far-end router using the specified SDP mesh binding.
Configures the static MPLS VC label used by the far-end router to send
packets to this router using the specified mesh SDP binding.
Configures a static MAC address entry in the VPLS forwarding data-
base that is associated with the specified mesh SDP binding.
Displays the SDP usage for the local router or for a far-end router IP
address.
Displays configuration information for the SDPs associated with the
specified service.
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide June 2012