Show Policy Vlan Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy vlan group

Displays information about pending and applied policy VLAN groups.
show [applied] policy vlan group [group_name]
Syntax Definitions
applied
group_name
Defaults
By default, all VLAN groups are displayed with this command.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the group_name parameter to display information for a specific VLAN group.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy port group.
- Indicates the policy port group is pending deletion.
# Indicates that the policy port group differs between
the pending/applied port groups.
Examples
-> show policy vlan group
Group Name
----------+------------------------+---------------
Vlan_grp1
Vlan_grp1
Vlan_grp1
Vlan_grp2
Vlan_grp3
Vlan_grp3
Vlan_grp3
Vlan_grp3
Vlan_grp3
OmniSwitch CLI Reference Guide
Displays only those policy VLAN groups that have been applied.
The name of the policy VLAN group for which you want to display
information; or a wildcard sequence of characters for displaying infor-
mation about VLAN groups with similar names. Use an asterisk (*) to
indicate a wildcard character.
vlan
100
101
200
1234
2000
2001
2003-2005
2500
3000
June 2012
From
cli
cli
cli
cli
cli
cli
cli
cli
cli
page 33-213