Show User Password-Policy - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show user password-policy

Displays the global password settings configured for the switch.
show user password-policy
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
The password policy contains parameter values that define configuration requirements for all passwords
that are created on the switch. Use this command to display the current parameter values for the password
policy.
Examples
-> show user password-policy
Password Policy:
Contain username flag: Enable
Minimum number of English uppercase characters: 6
Minimum number of English lowercase characters: 4
Minimum number of base-10 digit: 2
Minimum number of non-alphanumeric: 3
Minimum size: 8
Password history: 4
Password minimum age: 20 (days)
Password expiration: 40 (days)
output definitions
Contain username flag
Minimum number of English
uppercase characters
Minimum number of English
lowercase characters
Minimum number of base-10
digit
Minimum number of non-
alphanumeric
page 36-124
Indicates if the username is included with the password check (Enable
or Disable). Configured through the
contain-username command.
The minimum number of uppercase characters required in a password.
Configured through the user password-policy min-uppercase
mand.
The minimum number of lowercase characters required in a password.
Configured through the user password-policy
The minimum number of digits required in a password. Configured
through the user password-policy min-digit
The minimum number of non-alphanumeric characters required in a
password. Configured through the
pha command.
user password-policy cannot-
min-lowercase.
command.
user password-policy min-nonal-
OmniSwitch CLI Reference Guide
AAA Commands
com-
June 2012