802.1X Captive-Portal Retry-Count - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1X Commands

802.1x captive-portal retry-count

Configures the number of login attempts allowed before the Captive Portal fail policy is applied to the
device.
802.1x slot/port captive-portal retry-count retries
Syntax Definitions
slot/port
retries
Defaults
parameter
retries
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
The parameters configured with this command apply to the Captive Portal configuration for the speci-
fied 802.1x port.
•
When a device has failed the allowed number of login attempts, the fail case for the Captive Portal
policy configured for the 802.1x port is applied. To allow an unlimited number of login attempts, spec-
ify zero for the retry count value.
Examples
-> 802.1x 3/1 captive-portal session-limit 8 retry-count 5
-> 802.1x 4/1 captive-portal session-limit 4 retry-count 2
Release History
Release 6.3.4; command was introduced.
OmniSwitch CLI Reference Guide
The slot and port number of the 802.1x port.
The number of login attempts allowed (1–99).
default
3
June 2012 page 35-29