Clear Efm-Oam Log-History - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

LINK OAM Commands

clear efm-oam log-history

Clears the LINK OAM event logs history a port, range of ports or all ports.
clear efm-oam log-history port slot/port[-port2]
Syntax Definitions
slot/port
-port2
Defaults
By default, the event logs are cleared for all the ports if no port is specified in the command.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
Use the port parameter with this command to clear the statistics for a specific port or range of ports.
Examples
-> clear efm-oam log-history
-> clear efm-oam log-history port 1/1
-> clear efm-oam log-history port 2/1-3
Release History
Release 6.4.2; command was introduced.
Related Commands
show efm-oam port statistics
show efm-oam port history
MIB Objects
alaDot3OamGlobalClearEventLogs
alaDot3OamEventLogTable
alaDot3OamPortClearEventLogs
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3).
Specifies the last port in the range of ports.
Displays the LINK OAM statistics on a port, or a range of ports or
on all ports.
Displays the log of events that have occurred on a port. Use this
command to display specific event logs on a port.
June 2012 page 46-45