Show Netsec Group Port - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Network Security Commands

show netsec group port

Displays the group membership of ports.
show netsec {group {grp_name | all} | port slot/port [-port2]}
Syntax Definitions
grp_name
all
slot/port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show netsec group all
Slot/Port Port-RangeGroup
---------+----------------------------
2/5
2/7
-> show netsec group a
Slot/Port Port-RangeGroup
---------+-----------------------------
2/5
-> show netsec port 2/7
Slot/Port Port-RangeGroup
---------+------------------------------
2/7
-> show netsec group a port 2/5
Slot/Port Port-RangeGroup
---------+------------------------------
2/5
OmniSwitch CLI Reference Guide
The name of the port-group (up to 16 characters).
Specifies all the monitoring-groups.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
a
b
a
b
a
June 2012 page 38-21