Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2498

•
Captive Portal policies are applied only to 802.1x enabled mobile ports that are configured with an
802.1x supplicant or non-supplicant policy that specifies the use of Captive Portal web-based authenti-
cation.
Examples
-> 802.1x 3/1 captive-portal policy authentication pass vlan 100 block fail vlan 10
-> 802.1x 4/1 captive-portal policy authentication pass group-mobility
Release History
Release 6.3.4; command was introduced.
Related Commands
802.1x supplicant policy
authentication
802.1x non-supplicant policy
802.1x captive-portal session-
limit
show 802.1x device
classification policies
show 802.1x captive-portal
configuration
MIB Objects
alaDot1xAuthPolicyTable
alaDot1xCaptivePortalPolicy
page 35-24
Configures 802.1x authentication device classification policies for sup-
plicants.
Configures device classification policies that do not perform 802.1x or
MAC authentication for non-supplicants.
Configures the length of a Captive Portal session and the number of
login attempts allowed before the device is classified as a failed login.
Displays device classification policies configured for an 802.1x port.
Displays the global Captive Portal configuration for the switch.
OmniSwitch CLI Reference Guide
802.1X Commands
June 2012