Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2529

802.1X Commands
output definitions
Slot/Port
MAC Address
MAC Authent Status
Classification Policy
VLAN Learned
Dynamic UNP
Release History
Release 6.1; command was introduced.
Release 6.1.2; Authentication Status and Classification Policy columns added.
Release 6.4.4; unp and detail parameters added.
Related Commands
802.1x captive-portal address
show 802.1x device
classification policies
MIB Objects
alaDot1xPortTable
alaDot1xNonSupplicantSlotNum
alaDot1xNonSupplicantPortNum
alaDot1xNonSupplicantMACAddress
alaDot1xNonSupplicantVlanID
alaDot1xHicEnabledMAC
alaDot1xNonSupplicantHicEnabledMAC
alaDot1xHicFlag
OmniSwitch CLI Reference Guide
The 802.1X slot and port number that provides access to the
non-802.1x device.
The source MAC address of the non-802.1x device connected to the
802.1x port.
Indicates whether or not MAC authentication failed.
•
Success - Non-supplicant learned according to the Success policy.
•
Failed - Non-supplicant learned according to the Failed policy
•
Fail (timeout) - Non-Supplicant learned according to the auth-
server-down policy.
The 802.1x device classification policy that was applied to the device.
The VLAN ID of the VLAN in which the source MAC address of the
non-802.1x device was learned.
The status of dynamic UNP; enabled or disabled.
Displays information about ports configured for 802.1X.
Displays device classification policies configured for an 802.1x port.
June 2012 page 35-55