Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2753

Network Security Commands
2/5 tcp-addr-scan
2/5 syn-flood
2/5 syn-flood
2/5 syn-failure
2/5 syn-failure
2/5 syn-ack-scan
2/5 syn-ack-scan
2/5 fin-scan
2/5 fin-ack-diff
2/5 rst-count
-> show netsec group test1 anomaly arp-addr-scan traffic
Slot
Port Anomaly
----+----------------+-----------+----------+----------+----------+-----------
2/1 arp-addr-scan
2/1 arp-addr-scan
2/2 arp-addr-scan
2/2 arp-addr-scan
output definitions
Slot/Port
Anomaly
Packet
Curr-in
Curr-out
Last-in
Last-out
Release History
Release 6.3.1; command was introduced.
Related Commands
netsec group port
netsec group anomaly
show netsec statistics
OmniSwitch CLI Reference Guide
rst -
syn-only 0
syn-ack 0
syn-only 0
syn-ack -
syn-ack 0
syn-nack 0
fin-nack 0
fin-ack 0
rst 0
Packet Curr-in
arp-rep -
arp-req 1500
arp-rep -
arp-req 0
Slot number for the module and physical port number on that module.
The type of anomaly.
The packet being monitored.
The number of incoming packets during the current monitoring period.
The number of outgoing packets during the current monitoring period.
The number of incoming packets during the last monitoring period.
The number of outgoing packets during the last monitoring period.
Associates or disassociates port-range with monitoring-group.
Configures the monitoring period of an anomaly for a port-group,
packet count configuration for triggering anomaly detection, anomaly
detection algorithm's sensitivity to discrepancy in standard and
observed traffic pattern.
Displays the pattern counts on ports.
June 2012
0 -
0 0
0 0
- 0
0 -
0 0
0 0
0 0
0 0
0 0
Curr-out Last-in
0 -
- 1746
0 -
- 0
0
0
0
-
0
0
0
0
0
0
Last-out
0
-
0
-
page 38-11