Show Router Ldp Bindings Ingress-Label - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS LDP Commands

show router ldp bindings ingress-label

Displays ingress LDP bindings for a specific label number or for a range of label numbers.
show router ldp bindings ingress-label start-label [end-label]
Syntax Definitions
start-label
end-label
Defaults
By default, all ingress LDP bindings starting with the specified label number are displayed
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the optional end-label parameter along with the start-label parameter to specify a range of ingress
label bindings to display.
•
If an ending label number is not specified, then all ingress label bindings beginning with the starting
label number forward are displayed. No range is specified.
Examples
->show router ldp bindings ingress-label 131068
LDP LSR ID: 10.11.0.6
Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,
S = Status Signaled Up,
R = VPRN Service, V = VPLS Service, W = VPWS Service
TLV = (Type, Length: Value)
LDP Prefix Bindings
Prefix
------------------+---------------+-------+------+-------------+---------------
No Matching Entries Found
LDP Service FEC 128 Bindings
Type VCId
------+----------+----------+------+---------------+-------+-------+-----+-----
V-Eth 100
No. of VC Labels: 1
LDP Service FEC 129 Bindings
AGI
Type
OmniSwitch CLI Reference Guide
The ingress label number to display. The valid range is 16–1048575.
The last ingress label number in a range of labels to display. The valid
range is 17–1048575.
D = Status Signaled Down,
Peer IngLbl
SvcId SDPId
100 10
SAII
SvcId SDPId Peer
June 2012
EgrLbl EgrIntf
Peer IngLbl
10.11.0.66 131068U 131068
IngLbl
EgrNextHop
EgrLbl LMTU RMTU
1500 1500
TAII
EgrLbl LMTU RMTU
page 48-39