Show Policy Rule - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy rule

Displays information about pending and applied policy rules.
show [applied] [bridged | routed | multicast] policy rule [rule_name]
Syntax Definitions
applied
bridged
routed
multicast
rule_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all rules is displayed unless rule_name is specified.
•
Information for all rule types is displayed unless a keyword (bridged, routed, multicast) is specified.
•
Use the show active policy rule
enforced on the switch.
•
The display may include any of the following characters:
character definition
+ Indicates that the policy rule has been modified or has
been created since the last qos apply.
- Indicates the policy object is pending deletion.
# Indicates that the policy object differs between the pend-
ing/applied objects.
OmniSwitch CLI Reference Guide
Indicates that only policy rules that have been applied should be
displayed.
Displays rules that apply to bridged traffic.
Displays rules that apply to routed traffic.
Displays rules that apply to multicast traffic.
The name of the rule for which you want to display information; or a
wildcard sequence of characters for displaying information about rules
with similar names. Use an asterisk (*) to indicate a wildcard character.
command to display only active rules that are currently being
June 2012 page 33-229