Show Health Threshold - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show health threshold

Displays current health threshold settings.
show health threshold [rx | txrx | memory | cpu | temperature]
Syntax Definitions
rx
txrx
memory
cpu
temperature
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Unless a specific resource type (i.e., rx, txrx, memory, cpu, or temperature) is specified, threshold
information for all resources displays.
•
To display only a specific threshold, enter the command, followed by the specific resource type
(rx, txrx, memory, cpu, or temperature). For example, to display only the memory threshold, enter
the following syntax: show health threshold memory.
Examples
-> show health threshold
Rx Threshold
TxRx Threshold
Memory Threshold
CPU Threshold
Temperature Threshold = 50
page 52-6
Displays the current input (RX) traffic threshold.
Displays the current output/input (TX/RX) traffic threshold.
Displays the current RAM memory usage threshold.
Displays the current CPU usage threshold.
Displays the current chassis temperature threshold.
= 80
= 80
= 80
= 80
Health Monitoring Commands
OmniSwitch CLI Reference Guide June 2012