Show Aaa-Device Non-Supplicant-Users - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

show aaa-device non-supplicant-users

Displays the Access Guardian status of all non-supplicant (non-802.1x) users learned on the switch.
show aaa-device non-supplicant-users [unp profile_name | policy device_policy | authentication-status
[success | fail]] [port slot/port]
Syntax Definitions
profile_name
device_policy
authentication success
authentication fail
slot/port
Defaults
If none of the optional parameters are specified with this command, all non-supplicant users are displayed
by default.
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
•
Use the unp profile_name parameter to display only those users associated with a specific user
network profile.
•
Use the policy device_policy parameter to display only those users authenticated with one of the device
classification policy types. To specify which policy to use with this command, enter one of the follow-
ing types for the device_policy parameter value:
policy type
vlan
user-network-profile
group mobility
default-vlan
captive-portal
authentication
•
Use the authentication success or authentication fail parameters to display only those users that have
either passed or failed authentication.
•
Use the port slot/port parameter to display only those users learned on a specific port. Note that it is
also possible to combine this parameter with any of the other show aaa-device non-supplicant-users
command parameters.
OmniSwitch CLI Reference Guide
The name of a user network profile.
The type of Access Guardian device classification policy.
Display all non-supplicant users that have successfully authenticated.
Display all non-supplicant users that have failed authentication.
The slot and port number designation for a specific switch port.
June 2012 page 36-163