Show Aaa Priv Hexa - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show aaa priv hexa

Displays hexadecimal values for command domains/families. Useful for determining how to express
command families in hexadecimal; hexadecimal values are used in configuring user privileges in attributes
on an external LDAP or RADIUS authentication server.
show aaa priv hexa [domain or family]
Syntax Definitions
domain or family
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
•
Valid values for the family parameter are listed in the Corresponding Families column of the following
table:
Domain
domain-admin
domain-system
domain-physical
domain-network
domain-layer2
domain-service
domain-policy
domain-security
•
Note that some command families may not be supported depending on the hardware platform you are
running.
•
If you do not specify a command family, hexadecimal values for all commands sets will display.
page 36-154
The CLI command domain or particular command family for which you
want to display hexadecimal values. See table in Usage Guidelines.
Corresponding Families
file telnet dshell debug
system aip snmp rmon webmgt config
chassis module interface pmm health
ip rip ospf bgp vrrp ip-routing ipx ipmr ipms
vlan bridge stp 802.1q linkagg ip-helper
dns
qos policy slb
session avlan aaa
OmniSwitch CLI Reference Guide
AAA Commands
June 2012