Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3064

Examples
-> configure router ldp interface-parameters hello 40 2
-> configure router ldp interface-parameters interface vlan-14 hello 50 10
-> configure router ldp interface-parameters no hello
-> configure router ldp interface-parameters interface vlan-14 no hello
Release History
Release 6.4.2; command was introduced.
Related Commands
configure router ldp interface-
parameters interface
show router ldp parameters
show router ldp interface
MIB Objects
vRtrLdpGeneralTable
vRtrLdpGenHelloFactor
vRtrLdpGenHelloTimeout
vRtrLdpIfTable
vRtrID
vRtrLdpIfIndex
vRtrLdpPeerAddress
vRtrLdpIfHelloFactor
vRtrLdpIfHelloTimeout
page 48-8
Configures LDP support on an IP interface.
Displays global LDP parameter values for the switch.
Displays the LDP interface configuration for the switch.
MPLS LDP Commands
OmniSwitch CLI Reference Guide June 2012