Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3245

Virtual Private LAN Service (VPLS) Commands
Usage Guidelines
•
Use this command to clear all MACs, a specific MAC, or all MACs associated with a specific SAP or
mesh SDP from the FDB associated with the specified VPLS.
•
A SAP ID is comprised of an access port or link aggregate number and an encapsulation type. To spec-
ify an existing SAP ID with this command, combine the :all or :qtag1 parameter with the slot/port or
linkagg agg_num parameter. For example, if a SAP is mapped to access port 1/10 and customer traffic
ingressing on this SAP is tagged with VLAN ID 200, enter 1/10:200 (slot/port:qtag) for the SAP ID.
Examples
-> clear service id 10 fdb all
-> clear service id 20 fdb mac 00:00:1a:22:33:10
-> clear service id 30 fdb 1/10:all
-> clear service id 40 fdb linkagg 10:all
-> clear service id 50 fdb mesh-sdp 10
Release History
Release 6.4.2; command was introduced.
Related Commands
show service fdb-info
show service fdb-mac
MIB Objects
tlsFdbInfoTable
tlsFdbMacAddr
tlsFdbType
tlsFdbLocale
sapBaseInfoTable
sapPortId
sapEncapValue
sdpBindTable
sdpBindId
sdpBindType
svcBaseInfoTable
svcId
svcDefMeshVcId
OmniSwitch CLI Reference Guide
Displays global forwarding database information for the router
Displays the MAC address entry information found in the forwarding
database.
June 2012 page 50-71