Ethoam Association Ccm-Interval - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam association ccm-interval

Modifies the Continuity Check Message (CCM) transmission interval of an Ethernet OAM Maintenance
Association.
ethoam association association_name domain {domain_name | mac_address}
ccm-interval {interval-invalid | interval100ms | interval1s | interval10s | interval1m | interval10m}
Syntax Definitions
ma_name
md_name
interval-invalid
interval100ms
interval1s
interval10s
interval1m
interval10m
Defaults
parameter
interval-invalid |
interval100ms | interval1s |
interval10s | interval1m |
interval10m
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
The ma_name should be unique amid all those used by or available to the service provider within a
domain.
Examples
-> ethoam association MA domain MD ccm-interval interval10s
OmniSwitch CLI Reference Guide
Name of the Ethernet OAM Association. Up to 48 (minus the domain
name length) characters may be used.
Specifies the domain name. For more information on the different
formats of the domain name, refer to
page 45-5.
Specifies that no CCMs are sent by a MEP
Specifies the CCMs are sent every 100 milli seconds.
Specifies that CCMs are sent every 1 second.
Specifies that CCMs are sent every 10 seconds.
Specifies that CCMs are sent every minute.
Specifies that CCMs are sent every 10 minutes.
default
interval10s
June 2012
ethoam domain command on
page 45-15