Network Security Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Network Security (also known as Alcatel-Lucent's Traffic Anomaly Detection feature) detects anomalies
in network traffic through statistical analysis of a port's ingress and egress packets. Anomalies occur when
traffic patterns of a port do not meet expectations. Network Security detects such anomalies in real time
and upon detection can log and/or generate an SNMP trap and/or disable the anomalous port automati-
cally.
Network Security provides the following capabilities:
•
Real time network traffic monitoring.
•
Dynamic anomaly detection.
•
Dynamic anomalous port quarantining.
Note. The Network Security feature is supported only on the OmniSwitch 6850, 6855, and 9000E series.
MIB information for the Network Security commands is as follows:
Filename: AlcatelIND1Ns.mib
Module: ALCATEL-IND1-NETSEC-MIB
A summary of available commands is listed here:
netsec group port
netsec group anomaly
show netsec summary
show netsec traffic
show netsec statistics
show netsec config
show netsec operation
show netsec group port
Configuration procedures for Network Security are explained in the "Configuring Network Security"
chapter of the OmniSwitch AOS Release 6 Network Configuration Guide.
OmniSwitch CLI Reference Guide
38 Network Security
June 2012
Commands
page 38-1