Show Active Policy List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show active policy list

Displays information about applied policy lists that are active (enabled) on the switch.
show active policy list [list_name]
Syntax Definitions
list_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all active rules is displayed unless a list_name is specified.
•
Use the show policy list
•
Applied lists may or may not be active on the switch. Applied lists are inactive if they have been
administratively disabled with the disable option in the policy list command.
•
The display may include any of the following characters:
character definition
+ Indicates that the policy list has been modified or has been
created since the last qos apply.
- Indicates the policy list is pending deletion.
# Indicates that the policy list differs between the pending/
applied lists.
Examples
-> show active policy list
Group Name
list1
+list2
egress_list1
page 33-234
The name of the list for which you want to display information; or a
wildcard sequence of characters for displaying information about lists
with similar names. Use an asterisk (*) to indicate a wildcard character.
command to display inactive as well as active policy lists.
From Type
cli unp
cli unp
cli egress Yes
Enabled Entries
Yes r1
r2
Yes r3
r1
r2
r3
OmniSwitch CLI Reference Guide
QoS Policy Commands
June 2012