Ethoam Default-Domain Primary-Vlan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam default-domain primary-vlan

Configures the default domain settings for the specified primary VLAN.
ethoam default-domain primary-vlan {vlan-id} [level {no-level | num}] [mhf {none | default | explicit |
defer}] [id-permission {none | chassisid | defer}]
no ethoam default-domain
Syntax Definitions
vlan-id
no-level
num
none
default
explicit
defer
none
chassisid
defer
Defaults
parameter
no-level | num
none | explicit | default | defer
none | chassisid | defer
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
On modification of MHF for any primary VID, Automip is invoked for all VLANS associated with this
primary VID.
OmniSwitch CLI Reference Guide
VLAN Identifier.
MD level is inherited from the default domain level.
MD Level. Valid range is 0 to 7.
No MHFs can be created.
MHFs can be created.
MHFs can be created only if a MEP is created at some lower MD Level.
MHF defers to the default domain MHF value.
Sender ID TLV is not to be sent.
Chassis ID Length, Chassis ID Subtype and Chassis ID TLV are to be
present.
ID permission defers to the default domain ID permission value.
default
no-level
defer
defer
June 2012 page 45-23