Configure Service Sdp Description - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service sdp description

Configures a description for the specified SDP.
configure service sdp sdp-id description desc-info
configure service sdp sdp-id no description
Syntax Definitions
sdp-id
desc-info
Defaults
By default, a description is not added when the SDP is created.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the no form of this command to remove the description from the specified SDP.
•
Printable, 7-bit ASCII characters are also allowed in the description text string.
Examples
-> configure service sdp 10 description "SW-A to SW-B"
-> configure service sdp 10 no description
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing SDP ID number.
An ASCII text string up to 80 characters in length. Enclose special char-
acters, such as #, $, or spaces, in double quotation marks (for example
"PE1 to PE2").
June 2012 page 50-13