Aaa Authentication Default - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa authentication default

Sets the authenticated switch access type to the default server setting.
aaa authentication {console | telnet | ftp | http | snmp | ssh} default
Syntax Definitions
console
telnet
ftp
http
snmp
ssh
Defaults
By default, the default Authenticated Switch Access server setting does not include any servers.
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the aaa authentication command to set the default servers.
Examples
-> aaa authentication telnet default
-> aaa authentication default default
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
Configures the default Authenticated Switch Access server setting for
the console port.
Configures the default Authenticated Switch Access server setting for
Telnet.
Configures the default Authenticated Switch Access server setting for
FTP.
Configures the default Authenticated Switch Access server setting for
Web-based management.
Configures the default Authenticated Switch Access server setting for
any port used for SNMP.
Configures the default Authenticated Switch Access server setting for
any port used for Secure Shell.
June 2012 page 36-25