Aaa Vlan No - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa vlan no

Removes a user from an Authenticated VLAN. You must know the MAC address associated with the user.
aaa avlan no [mac-address] mac_address
Syntax Definitions
mac-address
mac_address
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the show avlan user command to display user MAC addresses.
Examples
-> aaa avlan no 00:20:da:05:f6:23
Release History
Release 6.1; command was introduced.
Related Commands
aaa authentication vlan single-
mode
aaa authentication vlan
multiple-mode
show avlan user
MIB Objects
aaaAuthenticatedUserTable
aaaaMacAddress
OmniSwitch CLI Reference Guide
Optional syntax.
The MAC address of the user who should be removed from an Authen-
ticated VLAN.
Specifies the AAA servers to be used in single-authority mode for
Layer 2 Authentication.
Specifies the AAA servers to be used in multiple-authority mode for
Authenticated VLANs.
Displays MAC addresses for Authenticated VLAN users on the switch.
June 2012 page 36-19