sflow poller
Gets counter samples from ethernet driver and fills up the counter part of the UDP datagram.
sflow poller num portlist receiver receiver_index interval value
no sflow poller num portlist
Syntax Definitions
num
portlist
receiver_index
value
Defaults
parameter
receiver_index
value
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the no form of this command to delete a poller.
Examples
-> sflow poller 1 2/6-10 receiver 1 interval 30
-> no sflow poller 1 2/6-10
Release History
Release 6.1.1; command was introduced.
Related Commands
show sflow poller
page 42-8
Specifies the instance id.
Specifies the interface index range.
Specifies the receiver index.
Specifies the maximum number of seconds between successive samples
(interval value).
default
0
0
Displays the poller table.
OmniSwitch CLI Reference Guide
sFlow Commands
June 2012