Aaa Classification-Rule Mac-Address - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

aaa classification-rule mac-address

Defines a User Network Profile (UNP) MAC address mobile rule. If the source MAC address of a device
matches the MAC address defined for the rule, the specified UNP is applied to the device. UNP mobile
rules are applied using an Access Guardian Group Mobility device classification policy.
aaa classification-rule mac-address mac_address user-network-profile name profile_name
aaa classification-rule no mac-address mac_address
Syntax Definitions
mac_address
profile_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove the UNP mobile rule from the switch configuration.
•
To change the UNP associated with a mobile rule, enter the MAC address of an existing rule but spec-
ify a different UNP name.
•
When Group Mobility is configured as an Access Guardian device classification policy for an 802.1x
port, both UNP mobile rules and VLAN mobile rules are applied to device traffic on that port.
•
Note that UNP mobile rules take precedence over VLAN mobile rules.
Examples
-> aaa classification-rule mac-address 00:00:2a:33:44:01 user-network-profile name
accounting
-> aaa classification-rule no mac-address 00:00:2a:33:44:01
Release History
Release 6.3.4; command was introduced.
page 36-82
MAC address (e.g., 00:00:39:59:f1:0c).
The name of an existing user network profile.
OmniSwitch CLI Reference Guide
AAA Commands
June 2012