Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3090

LDP Service FEC 128 Bindings
Type VCId
------+----------+----------+------+---------------+-------+-------+-----+-----
V-Eth 100
No. of VC Labels: 1
LDP Service FEC 129 Bindings
AGI
Type
------+----------+----------+------+---------------+-------+-------+-----+-----
No Matching Entries Found
output definitions
Prefix
Peer
Type
VCId
SvcId
SDPId
IngLbl
EgrLbl
EgrIntf/LspId
EgrNextHop
LMTU
RMTU
Release History
Release 6.4.2; command was introduced.
page 48-34
SvcId SDPId Peer
100 10
SAII
SvcId SDPId Peer
The IP network address and mask used to identify the prefix binding.
The IP address of the LDP peer.
The type of service (V-Eth) exchanging labels through the Service
Distribution Point (SDP).
The virtual connection (VC) ID number used by each end of the SDP
tunnel to identify the VC.
The unique service identification number used to identify the service.
The SDP ID number associated with the service.
The ingress LDP label.
The egress LDP label.
The Label Switch Path (LSP) tunnel ID number (not the LSP path ID
number).
The next hop IP address for the egress label.
The local MTU number.
The remote MTU number.
IngLbl
10.11.0.6 131069U 131070
IngLbl
OmniSwitch CLI Reference Guide
MPLS LDP Commands
EgrLbl LMTU RMTU
1514 1500
TAII
EgrLbl LMTU RMTU
June 2012