Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2636

-> show aaa server TPub1
Server name = TPub1
Server type
IP Address 1
Port
Timeout (in sec)
Encryption enabled
-> show aaa server ldap2
Server name = ldap2
Server type
Host name 1
Retry number
Timeout (in sec)
Port
Domain name
Search base
RADIUS, TACACS+, and LDAP parameters are configured through the
aaa tacacs+-server, and
by the switch.
output definitions
Server name
Server type
Host name
IP address
Retry number
Timeout
Port
Encryption enabled
Domain name
Search base
Authentication port
Accounting port
VRF
Release History
Release 6.1; command was introduced.
Release 6.1.3; Encryption enabled field was added.
Release 6.4.2; added VRF ouput field.
page 36-102
= TACACS+,
= 10.10.5.1,
= 3,
= 2,
= no
= LDAP,
= ors40535,
= 3,
= 2,
= 389,
= manager,
= c=us,
aaa ldap-server commands. Parameters for the ACE server are automatically set
The name of the server. The switch automatically assigns "ace" to an
ACE server. A RADIUS, TACACS+ or LDAP server name is defined
through the aaa radius-server, aaa tacacs+-server, and aaa ldap-
server commands respectively.
The type of server (ACE, LDAP, TACACS+, or RADIUS).
The name of the primary LDAP, TACACS+, or RADIUS host.
The IP address(es) of the server.
The number of retries the switch makes to authenticate a user before
trying the backup server.
The timeout for server replies to authentication requests.
The port number for the primary LDAP or TACACS+ server.
The status of the encryption.
The super-user or administrative distinguished name in the format rec-
ognized by the LDAP-enabled directory servers.
The search base recognized by the LDAP-enabled directory servers.
The UDP destination port for authentication requests.
The UDP destination port for accounting requests.
The VRF name assigned to the server.
aaa radius-server,
OmniSwitch CLI Reference Guide
AAA Commands
June 2012